---

Recent papers

Microstructure, mechanical and tribological properties of oxide dispersion strengthened CoCrFeMnNi high-entropy alloys fabricated by powder metallurgy Journal of Materials Research and Technology 2023, 22, 1708–1722.

Electromigration failure in inkjet-printed Ag conductive lines Flexible and Printed Electronics 2023, 8 (1).

High-ductility aluminium alloys including small sub-grains with wide low angle boundary Journal of Alloys and Compounds 2023, 934.

Optimization of mixed grain size structure for enhancement of thermoelectric figure of merit in p-type BiSbTe-based alloys Journal of Materials Science 2022, 57 (38), 18131–18141.

Investigation of anisotropy in microstructure and thermoelectric properties of large-scaled p-type Bi–Sb–Te sintered body made by hot pressing Journal of Materials Science 2022, 57 (38), 18168–18177.

Application of Artificial Neural Network to Predict the Crystallite Size and Lattice Strain of CoCrFeMnNi High Entropy Alloy Prepared by Powder Metallurgy Metals and Materials International 2022.

Fabrication of ultrafine powder using processing control agent, and investigation of its effect on microstructure and thermoelectric properties of p-type (Bi, Sb) 2 Te 3 alloys Advanced Powder Technology 2022, 33 (2).

Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy Advanced Powder Technology 2022, 33 (4).

Enhancing the thermoelectric properties through hierarchical structured materials fabricated through successive arrangement of different microstructure Journal of Alloys and Compounds 2022, 910.

Enhancing the thermoelectric properties of powder metallurgically produced BiSbTe alloy through feasible electroless surface coating method Journal of the European Ceramic Society 2022, 42 (8), 3473–3479.

Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach Journal of Materials Research and Technology 2022, 17, 1686–1695.

The subsurface deformed region and superficial protective tribo-oxide layer during wear in a non-equiatomic CoCrFeNiV high entropy alloy Materials and Design 2022, 218.

Outstanding high-temperature strength of novel Fe–Cr–Ni–Al–V ferritic alloys with hierarchical B2–NiAl precipitates Materials Science and Engineering A 2022, 840.

Synergistic Optimization of the Thermoelectric and Mechanical Properties of Large-Size Homogeneous Bi 0.5 Sb 1.5 Te 3 Bulk Samples via Carrier Engineering for Efficient Energy Harvesting ACS Applied Materials and Interfaces 2022, 14 (8), 10394–10406.

Erratum: Hydrogen-Bonding Mediated Molecular Vibrational Suppression for Enhancing Fluorescence Quantum Yield Applicable for Visual Phenol Detection (ACS Applied Materials and Interfaces (2021) 13:45 ACS Applied Materials and Interfaces 2022, 14 (2), 3610–0.

Synthesis of NdFeB Magnetic Particles with High (BH) max from Their Optimized Oxide Powders Through Reduction-Diffusion Method IEEE Magnetics Letters 2022, 13.

Metallic Phase Transition Metal Dichalcogenide Quantum Dots as Promising Bio-Imaging Materials Nanomaterials 2022, 12 (10).

SARS-CoV-2 spike protein detection using slightly tapered no-core fiber-based optical transducer Microchimica Acta 2022, 189 (9).

Thiol-ene UV-curable sponge electrolyte for low-voltage color changing wearable tactile device Polymer 2022, 250.

Designing a Bimodal BaTiO 3 Artificial Layer to Boost the Dielectric Effect toward Highly Reversible Dendrite-Free Zn Metal Anodes ACS Applied Materials and Interfaces 2022, 14 (31), 35613–35622.

Electromigration Reliability in Ag Lines Printed with Nanoparticle Inks: Implications for Printed Electronics ACS Applied Nano Materials 2022, 5 (2), 2569–2577.

Inkjet Printing of Glass Frit Suspensions: From Uniform Lines to Uniform Films Journal of Imaging Science and Technology 2022, 66 (1).

Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy Journal of Alloys and Compounds 2022, 890.

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy Materials Science and Engineering A 2022, 831.

Recent development of coloring alloys Progress in Materials Science 2022, 123.

Nanocrystalline single-phase high-entropy alloy synthesized by using intermetallic compound type (TiZrHf)-(NiCuCo) high-entropy metallic glass precursor Scripta Materialia 2022, 209.

A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system Scripta Materialia 2022, 210.

Strain rate effects on microstructure and texture evolution in cold-sheared Al-6 Mg alloys during low-temperature annealing Journal of Alloys and Compounds 2022, 889.

Mg effect on the cryogenic temperature toughness of Al-Mg alloys Materials and Design 2022, 224.

Deformation behavior of a cold-rolled 7075 Al alloy sheet containing small sub-grains with wide low-angle boundaries Materials Science and Engineering A 2022, 861.

Tuning of thermoelectric transport properties via the formation of hierarchical structures in Bi-doped Gd 2 O 3 /Bi 0. 5 Sb 1 . 5 Te 3 nanocomposites International Journal of Energy Research 2021, 45 (15), 20921–20933.

Effect of heat treatment on magnetic properties of nanocomposite Nd-lean Nd 7 Fe 73 B 20 ribbons Journal of Materials Science: Materials in Electronics 2021, 32 (2), 2338–2345.

Investigation of homogeneity in microstructure and thermoelectric properties at various positions in high-thickness sintered bulks of p-type 20%Bi 2 Te 3 –80%Sb 2 Te 3 alloys Journal of Materials Science: Materials in Electronics 2021, 32 (12), 16302–16310.

Enhanced thermoelectric performance of Mo nanoparticle decorated n-type Bi 2 Te 2.7 Se 0.3 powder composites Applied Surface Science 2021, 548.

Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions Applied Surface Science 2021, 549.

Synergetic effects of co-dispersed Cu and insulating HfO 2 nanoparticles enabled high thermoelectric figure of merit in Bi 0.5 Sb 1.5 Te 3 composites Applied Surface Science 2021, 556.

Rare-earth hexaboride 2D nanostructures synthesis and coupling with NaAlH 4 for improved hydrogen release Ceramics International 2021, 47 (1), 877–888.

Understanding the microstructure and mechanical properties of Ta x Al 0.7 CoCrFeNi 2.1 eutectic high entropy composites: Multi-scale deformation mechanism analysis Composites Part B: Engineering 2021, 214.

Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates Journal of Alloys and Compounds 2021, 856.

Nano-scale structural evolution of quaternary AlCrFeNi based high entropy alloys by the addition of specific minor elements and its effect on mechanical characteristics Journal of Alloys and Compounds 2021, 868.

Formation of inhomogeneous micro-scale pores attributed ultralow κ lat and concurrent enhancement of thermoelectric performance in p-type Bi 0.5 Sb 1.5 Te 3 alloys Journal of Alloys and Compounds 2021, 881.

Investigation of phase-transformation path in TiZrHf(VNbTa)x refractory high-entropy alloys and its effect on mechanical property Journal of Alloys and Compounds 2021, 886.

AlN nucleation and spontaneous pattern formation via combustion of an Al-C-AlF 3 mixture in nitrogen Journal of Crystal Growth 2021.

Investigation of graphene dispersion on thermoelectric, magnetic, and mechanical properties of p-type Bi 0.5 Sb 1.5 Te 3 alloys Materials Chemistry and Physics 2021, 266.

Enhanced thermoelectric performance of Bi 0.5 Sb 1.5 Te 3 composites through potential barrier scattering at heterogeneous interfaces Materials Research Bulletin 2021, 133.

Development of coherent-precipitate-hardened high-entropy alloys with hierarchical NiAl/Ni 2 TiAl precipitates in CrMnFeCoNiAl x Ti y alloys Materials Science and Engineering A 2021, 823.

Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y–Ti–Al–Zr) addition processed by Spark Plasma Sintering (SPS) Nuclear Engineering and Technology 2021, 53 (8), 2582–2590.

Simultaneous effects of deformation-induced plasticity and precipitation hardening in metastable non-equiatomic FeNiCoMnTiSi ferrous medium-entropy alloy at room and liquid nitrogen temperatures Scripta Materialia 2021, 202.

Hydrogen-bonding-mediated molecular vibrational suppression for enhancing the fluorescence quantum yield applicable for visual phenol detection ACS Applied Materials and Interfaces 2021, 13 (45), 54339–54347.

Modulating the electrical conductivity of a graphene oxide-coated 3D framework for guiding bottom-up lithium growth Journal of Materials Chemistry A 2021, 9 (3), 1822–1834.

Powder characteristics of Al 0.5 CoCrFeMnNi high-entropy alloys fabricated by gas atomisation method Powder Metallurgy 2021, 64 (3), 219–227.

Reduction of thermal conductivity through complex microstructure by dispersion of carbon nanofiber in p-type Bi 0.5 Sb 1.5 Te 3 alloys Archives of Metallurgy and Materials 2021, 66 (3), 803–808.

Effect of powder heat treatment on chemical composition and thermoelectric properties of bismuth antimony telluride alloys fabricated by combining water atomization and spark plasma sintering Materials 2021, 14 (11).

Development of high‐performance thermoelectric materials by microstructure control of p‐type bisbte based alloys fabricated by water atomization Materials 2021, 14 (17).

Boosting photovoltaic performance in organic solar cells by manipulating the size of mos 2 quantum dots as a hole-transport material Nanomaterials 2021, 11 (6).

Co-Precipitation Synthesis and Characterization of Strontium Lanthanum Vanadate Nanoparticles Korean Journal of Materials Research 2021, 31 (4), 209–218.

Microstructure and mechanical properties of Cu-Ni-Zr-Ti bulk metallic glass composites by spark plasma sintering Journal of Korean Institute of Metals and Materials 2021, 59 (5), 281–288.

Soft, robust, Li-ion friendly halloysite-based hybrid protective layer for dendrite-free Li metal anode Chemical Engineering Journal 2021, 424.

Fabrication of electrochromic devices by laser patterning of spin-sprayed transparent conductive Ga:ZnO films Ceramics International 2021, 47 (5), 6470–6478.

Fully inkjet-printed BaTiO 3 capacitive humidity sensor: Microstructural engineering of the humidity sensing layer using bimodal ink Ceramics International 2021, 47 (17), 24693–24698.

Ion shielding functional separator using halloysite containing a negative functional moiety for stability improvement of Li–S batteries Journal of Energy Chemistry 2021, 60, 334–340.

Fiber-optic label-free biosensor for SARS‐CoV‐2 spike protein detection using biofunctionalized long-period fiber grating Talanta 2021, 235.

3D printing of metasurface-based dual-linear polarization converter Flexible and Printed Electronics 2021, 6 (4).

Strain-Insensitive Simultaneous Measurement of Bending and Temperature Based on Cascaded Long-Period Fiber Gratings Inscribed on Double-Clad Fiber IEEE Sensors Journal 2021, 21 (6), 7638–7647.

Ultrafine shape memory alloys synthesized using a metastable metallic glass precursor with polymorphic crystallization Applied Materials Today 2021, 22.

Development of coloring alloys: Color design for lightweight Al-Mg-Si alloys Materials and Design 2021, 200.

Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system Materials Science and Engineering A 2021, 823.

Development of precipitation-strengthened Al0.8NbTiVm (M = Co, Ni) light-weight refractory high-entropy alloys Materials 2021, 14 (8).

더보기