High-ductility aluminium alloys including small sub-grains with wide low angle boundary
Journal of Alloys and Compounds
2023,
934.
|
Effect of Mg remelting and mechanical hooks of steel on the mechanical and fatigue responses of resistance element welded AZ31/DP780 joints: Experimental, FEM and thermodynamic calculation studies
Journal of Materials Research and Technology
2023,
22,
1210–1237.
|
Customizable design of multiple-biomolecule delivery platform for enhanced osteogenic responses via ‘tailored assembly system’
Bio-Design and Manufacturing
2022,
5 (3),
451–464.
|
Effects of ZnO and cordierite contents on the wetting properties of a Bi 2 O 3 –ZnO–B 2 O 3 glass composite as a low-melting sealing glass
Journal of the Korean Ceramic Society
2022,
59 (2),
208–216.
|
A Study on Ceramic Heater Devices Based on Si 3 N 4 with a MoO 3 Protective Layer
Journal of Korean Institute of Metals and Materials
2022,
60 (4),
301–306.
|
Development of PZN-PMN-PZT Piezoelectric Ceramics with High d 33 and Q m Values
Materials
2022,
15 (20).
|
Design and Preparation of Self-Oscillating Actuators Using Piezoelectric Ceramics with High Coupling Factors and Mechanical Quality Factors
Micromachines
2022,
13 (2).
|
Effect of Process Temperature on Density and Electrical Characteristics of Hf 0.5 Zr 0.5 O 2 Thin Films Prepared by Plasma-Enhanced Atomic Layer Deposition
Nanomaterials
2022,
12 (3).
|
Initial Wetting Phenomena of MgO–SiO 2 Liquid Slag on MgO–C Refractories
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2022.
|
The effect of C content in MgO–C on dissolution behavior in CaO–SiO 2 –Al 2 O 3 slag
Ceramics International
2022,
48 (18),
26984–26991.
|
The effect of Fe x O content on dissolution behavior of an alumina inclusion in CaO–Al 2 O 3 –SiO 2 –Fe x O slag by a single hot thermocouple technique
Ceramics International
2022.
|
Microstructural and interface geometrical influence on the mechanical fatigue property of aluminum/high-strength steel lap joints using resistance element welding for lightweight vehicles: experimenta
Journal of Materials Research and Technology
2022,
17,
658–678.
|
Improving toughness of medium-Mn steels after friction stir welding through grain morphology tuning
Journal of Materials Science and Technology
2022,
118,
243–254.
|
Robust bonding and microstructure behavior of aluminum/high-strength steel lap joints using resistance element welding process for lightweight vehicles: Experimental and numerical investigation
Materials Science and Engineering A
2022,
833.
|
Solution-Processed Copper Iodide Film as a p-Type Electrical Conductor and Their Applications
ACS Applied Electronic Materials
2022,
4 (3),
1232–1237.
|
Analysis of Repetitive Bending on Flexible Wireless Power Transfer (WPT) PCB Coils for Flexible Wearable Devices
IEEE Transactions on Components, Packaging and Manufacturing Technology
2022.
|
Electrical Reliability of Flexible Silicon Package Integrated on Polymer Substrate During Repeated Bending Deformations
Journal of Electronic Packaging, Transactions of the ASME
2022,
144 (4).
|
Finite Element Analysis for Safe Design of a Flexible Microelectronic System under Bending Deformation
ECS Journal of Solid State Science and Technology
2022,
11 (4).
|
Phase Evolution, Microstructure, and Electrical Resistivity of CaMnO 3 -CaZrO 3 Composites
Transactions on Electrical and Electronic Materials
2022,
23 (4),
343–347.
|
Effects of using MgO, CaO additives as sintering aid in pressureless sintering of M 2 Si 5 N 8 :Eu 2+ (M = Ba, Sr) phosphor ceramics for amber LED automotive applications
Journal of Alloys and Compounds
2021,
858.
|
Effects of tetraethyl orthosilicate content and sintering temperature on the properties of Y 3 Al 5 O 12 :Ce 3+ phosphor ceramics for automotive headlamps
Materials Today Communications
2021,
28.
|
Characterization of titanium surface modification strategies for osseointegration enhancement
Metals
2021,
11 (4).
|
A study on sebum hardening effect of ZnO powder
Journal of Korean Institute of Metals and Materials
2021,
59 (3),
195–200.
|
Study on the mechanism for the deposition of a porous zinc thin film by using a modified DC magnetron sputtering system
Journal of the Korean Physical Society
2021,
78 (8),
679–687.
|
Multiple guidance of light using asymmetric micro prism arrays for privacy protection of device displays
Optics Express
2021,
29 (2),
2884–2892.
|
Piezoelectric ceramics with high d 33 constants and their application to film speakers
Materials
2021,
14 (19).
|
Fabrication of highly porous and pure zinc oxide films using modified dc magnetron sputtering and post-oxidation
Materials
2021,
14 (20).
|
Tri-doping of sol–gel synthesized garnet-type oxide solid-state electrolyte
Micromachines
2021,
12 (2),
1–14.
|
Degradation Kinetics of MgO-C Refractory at High Temperature
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2021,
52 (3),
1179–1185.
|
The Effect of Alumina Activity on Dissolution Behavior of Alumina Particles in CaO–Al 2 O 3 –SiO 2 Slags
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2021,
52 (6),
3938–3945.
|
Effect of White Mud Addition on Desulfurization Rate of Molten Steel
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2021,
52 (6),
3596–3605.
|
Wetting and Spreading Kinetics between Liquid CaO–SiO 2 Slags and a Solid SiO 2
ISIJ International
2021,
61 (12),
2923–2928.
|
Fracture mechanism of microporous Ag-sintered joint in a GaN power device with Ti/Ag and Ni/Ti/Ag metallization layer at different thermo-mechanical stresses
Journal of Materials Science
2021,
56 (16),
9852–9870.
|
The Ʃ3 twin dependence of thermo-mechanical fatigue of a polycrystalline high-purity Cu film
International Journal of Fatigue
2021,
150.
|
The correlation of austenite stability and sequence of strain accommodation during room temperature deformation of a duplex lightweight steel
Journal of Materials Research and Technology
2021,
13,
1923–1932.
|
An anomalous effect of grain refinement on yield stress in friction stir processed lightweight steel
Materials Science and Engineering A
2021,
799.
|
Effect of low transformation temperature welding consumable on microstructure, mechanical properties and residual stress in welded joint of A516 carbon steel
Journal of Korean Institute of Metals and Materials
2021,
59 (8),
524–532.
|
Knitted strain sensor with carbon fiber and aluminum-coated yarn, for wearable electronics
Journal of Materials Chemistry C
2021,
9 (46),
16440–16449.
|
Powder based additive manufacturing for biomedical application of titanium and its alloys: a review
Biomedical Engineering Letters
2020,
10 (4),
505–516.
|
Synthesis and characterization of MnO 2 added (Na 0.475 K 0.475 Li 0.05 )(Nb 0.9 Ta 0.05 Sb 0.05 )O 3 lead-free piezoelectric ceramics
Journal of the Korean Ceramic Society
2020,
57 (4),
440–446.
|
Preliminary characterization of glass/alumina composite using laser powder bed fusion (L-PBF) additive manufacturing
Materials
2020,
13 (9).
|
Brightness enhancement of a direct-current-driven electroluminescent device prepared with zinc-sulfide powder
Journal of Luminescence
2020,
220.
|
ITO/SiO 2 /ITO structure on a sapphire substrate using the oxidation of ultra-thin si films as an insulating layer for one-glass-solution capacitive touch-screen panels
Coatings
2020,
10 (2).
|
Nonuniformity-immune read-in integrated circuit for infrared sensor testing systems
Electronics (Switzerland)
2020,
9 (10),
1–10.
|
A Study on Computational Fluid Dynamic Simulations to Improve the Thickness Uniformity of Porous Metal Films Deposited by Using Cluster Sputtering
Journal of the Korean Physical Society
2020,
76 (1),
27–33.
|
Effect of varying Al 2 O 3 contents of CaO–Al 2 O 3 –SiO 2 slags on lumped MgO dissolution
Ceramics International
2020,
46 (5),
6205–6211.
|
Strengthening of DBA substrate with Ni/Ti/Ag metallization for thermal fatigue-resistant Ag sinter joining in GaN power modules
Journal of Materials Science: Materials in Electronics
2020,
31 (4),
3715–3726.
|
Optimizing the austenite stability in a ferritic lightweight steel through thermomechanical processing
Materials Characterization
2020,
166.
|
Evaluation of factors influencing the lath martensitic deformation behavior of multi-layered steels
Materials Science and Engineering A
2020,
785.
|
Crack initiation mechanism in ultrafine-grained copper fabricated by severe plastic deformation in the high-cycle fatigue regime
Materials Science and Engineering A
2020,
788.
|
Corrosion behavior and microstructure of stir zone in fe-30mn-3al-3si twinning-induced plasticity steel after friction stir welding
Metals
2020,
10 (11),
1–15.
|
In Twisting Motion, Stress-Free Zone of Wearable Electronics
Advanced Electronic Materials
2020,
6 (3).
|
Operation Range-Optimized Silver Nanowire Through Junction Treatment
Electronic Materials Letters
2020,
16 (5),
491–497.
|
