Performance evaluation of renewable-based sustainable micro-grid under predictive management control strategy: A case study of Gado refugee camp in Cameroon
Frontiers in Energy Research
2022,
10.
|
Application of Graphene Oxide as a Biomaterial for the Development of Large-Area Cell Culture Vessels
Applied Sciences (Switzerland)
2022,
12 (22).
|
Analysis of the Response Characteristics of Toluene Gas Sensors with a ZnO Nanorod Structure by a Heat Treatment Process
Sensors (Switzerland)
2022,
22 (11).
|
Removal of Fe from Ilmenite Ore Powders Through Selective Chlorination Using CO and Cl 2 Gas Mixture at 1073–1173 K in a Static Bed
Journal of Sustainable Metallurgy
2022.
|
Construction of trinuclear N-fused hybrid scaffolds by coupling and cyclization of 2-bromoaryl- and 2-bromovinylimidazoles with ureas under recyclable Cu/C–Al 2 O 3 catalysis
Tetrahedron
2022.
|
Lithium Recovery from NCM Lithium Ion Battery by Carbonation Roasting Followed by Water Leaching
Journal of Korean Institute of Metals and Materials
2022,
60 (10),
744–750.
|
Effect of valence state of cobalt in cobalt hexacyanoferrate coprecipitated at different temperatures on electrochemical behavior
International Journal of Energy Research
2022.
|
Effects of Annealing on the Microstructure and Thermoelectric Properties of Half-Heusler MNiSn (M = Ti, Zr, Hf)
Journal of Electronic Materials
2022,
51 (7),
3485–3494.
|
Synthesis of enhanced corrosion resistant Fe–B–C–Ti amorphous ribbons and evaluation of their photodegradation efficiency under light irradiation
Chemosphere
2022,
287.
|
Optimized electronic performance in half-Heusler Ti-doped NbFeSb materials by stoichiometric tuning at the Fe and Sb sites
Journal of Alloys and Compounds
2022,
891.
|
Energy harvesting from human body heat using highly flexible thermoelectric generator based on Bi 2 Te 3 particles and polymer composite
Journal of Alloys and Compounds
2022,
924.
|
Enhanced stability and rate performance of zinc-doped cobalt hexacyanoferrate (CoZnHCF) by the limited crystal growth and reduced distortion
Journal of Energy Chemistry
2022,
69,
649–658.
|
Thermodynamic patterns during in-situ heating of InAs nanowires encapsulated in Al 2 O 3 shells
Nanotechnology
2022,
33 (2).
|
Enhanced High Temperature Oxidation Resistance of the Conventional Ti-48Al-2Nb-2Cr Alloy through Carbon Pack Cementation and Analysis of the Carbon Diffusion Path
Journal of Korean Institute of Metals and Materials
2022,
60 (10),
723–731.
|
Practical Enhancements in Current Density and Power Generation of Bifacial Semitransparent Ultrathin CIGSe Solar Cells via Utilization of Wide Bandgap Zn-Based Buffer
Advanced Science
2022,
9 (13).
|
Atomic-scale platinum deposition on photocathodes by multiple redox cycles under illumination for enhanced solar-to-hydrogen energy conversion
Journal of Power Sources
2022,
533.
|
Sulfur-Treated ITO Back Contact for Enhanced Performance of Semitransparent Ultrathin Cu(In,Ga)Se 2 Solar Cells
ACS Applied Energy Materials
2022,
5 (9),
10611–10621.
|
Ultralow Lattice Thermal Conductivity and Enhanced Mechanical Properties of Cu and Sb Co-Doped SnTe Thermoelectric Material with a Complex Microstructure Evolution
ACS Sustainable Chemistry and Engineering
2022,
10 (4),
1367–1372.
|
A durable VO 2 transition layer and defect inactivation in BiVO 4 via spontaneous valence-charge control
Journal of Materials Chemistry A
2022,
10 (40),
21300–21314.
|
Newly designed surface control using Si addition in trace quantity for Zn-2Al-3Mg alloy coated steel sheet with improved corrosion resistance
Applied Surface Science
2022,
598.
|
Thermomechanical stability of Bi 2 Te 3 -based thermoelectric modules employing variant diffusion barriers
Intermetallics
2022,
140.
|
Performance of Bi 2 Te 3 -based thermoelectric modules tailored by diffusion barriers
Journal of Alloys and Compounds
2022,
895.
|
Diffusion bonding at the interface of Bi 2 Te 3 thermoelectric modules
Materials Chemistry and Physics
2022,
292.
|
Novel silver-enhanced hard gold electrodeposit applied for electrical contacts: comparison with conventional gold–cobalt alloy
Transactions of the Institute of Metal Finishing
2022,
100 (4),
213–220.
|
Electrodeposition of Pd–Ag alloy for electrical contacts
Surface Engineering
2022,
38 (6),
633–640.
|
Effect of Solution Temperature on Electrodeposition Behavior of Zn–Ni Alloy from Alkaline Zincate Solution
ISIJ International
2022,
62 (7),
1522–1531.
|
Synergistic Effect of Brightener and Solution Temperature on the Electrodeposition Behavior of Zn-Ni Alloy from Alkaline Zincate Solution
ISIJ International
2022,
62 (9),
1918–1929.
|
Effect of Solution Temperature on Electrodeposition Behavior of Zn-Ni Alloy from Alkaline Zincate Solution
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
2022,
108 (2),
120–130.
|
Synergistic Effect of Brightener and Solution Temperature on the Electrodeposition Behavior of Zn-Ni Alloy from Alkaline Zincate Solution
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
2022,
108 (4),
268–281.
|
Degreasing Efficiency of Electroplating Pretreatment Process Using Secondary Alcohol Ethoxylate as Nonionic Surfactant
Applied Sciences (Switzerland)
2022,
12 (21).
|
Zn–Ni Alloy Plating with Trivalent Chromate: Effects of NaF Additive Concentration and Treatment Time on Film Color, Thickness, and Electrochemical Properties
Coatings
2022,
12 (8).
|
Tensile and High-Cycle Fatigue Properties of Extruded AZ91–0.3Ca–0.2Y Alloy with Excellent Corrosion and Ignition Resistances
Metals and Materials International
2022,
28 (2),
385–396.
|
Aging Hardening and Precipitation Characteristics of Extruded Mg–9Al–0.8Zn–0.2Mn–0.3Ca–0.2Y Alloy
Metals and Materials International
2022.
|
Bending-deformation-induced inhomogeneous aging behavior and accelerated precipitation kinetics of extruded AZ80 alloy
Journal of Alloys and Compounds
2022,
918.
|
Effects of Sn addition on the microstructure and mechanical properties of extruded Mg–Bi binary alloy
Journal of Magnesium and Alloys
2022,
10 (3),
850–861.
|
Effects of surface roughness on bending properties of rolled AZ31 alloy
Journal of Magnesium and Alloys
2022.
|
Microstructural characteristics and low-cycle fatigue properties of AZ91 and AZ91–Ca–Y alloys extruded at different temperatures
Journal of Magnesium and Alloys
2022.
|
Difference in extrusion temperature dependences of microstructure and mechanical properties between extruded AZ61 and AZ91 alloys
Journal of Magnesium and Alloys
2022.
|
Underlying mechanisms of variation in yield asymmetry and strain hardening behavior of extruded pure Mg with Gd addition
Journal of Magnesium and Alloys
2022.
|
Variations in dynamic recrystallization behavior and mechanical properties of AZ31 alloy with extrusion temperature
Journal of Magnesium and Alloys
2022.
|
Microstructural evolution of pre-twinned Mg alloy with annealing temperature and underlying boundary migration mechanism
Journal of Magnesium and Alloys
2022.
|
{10–12} extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature
Materials Science and Engineering A
2022,
831.
|
Low-cycle fatigue properties and unified fatigue life prediction equation of hot-rolled twin-roll-cast AZ31 sheets with different thicknesses
Materials Science and Engineering A
2022,
833.
|
Microstructure evolution maps of AZ31 and AZ91–Ca–Y–MM alloys under precompression and subsequent annealing conditions
Materials Science and Engineering A
2022,
854.
|
Variation in bending deformation behavior and improvement in bendability of extruded pure Mg through Gd addition
Materials Science and Engineering A
2022,
855.
|
Through-Thickness Microstructures and Yield Strength Enhancement for AZ31 Mg Sheets Treated by Ultrasonic Nanocrystal Surface Modification
Journal of Korean Institute of Metals and Materials
2022,
60 (3),
169–179.
|
Analysis of Tensile Deformation Behavior of Rolled AZ31 Mg Alloy Subjected to Precompression and Subsequent Annealing Using DIC
Journal of Korean Institute of Metals and Materials
2022,
60 (9),
701–712.
|
Microstructural Control Strategy Based on Optimizing Laser Powder Bed Fusion for Different Hastelloy X Powder Size
Materials
2022,
15 (18).
|
Crash Performance of Strength Gradient Tube Induced by Selective Laser Patterning
Materials
2022,
15 (19).
|
Crystallinity Modulation of Electron Acceptor in One-Photon Excitation Pathway-Based Heterostructure for Visible-Light Photocatalysis
Solar RRL
2022,
6 (2).
|
Synthesis of crystalline g-C 3 N 4 with rock/molten salts for efficient photocatalysis and piezocatalysis
Green Energy and Environment
2022.
|
An ultralong-life SnS based anode through phosphate-induced structural regulation for high-performance sodium ion batteries
Science Bulletin
2022.
|
Exceeding 50 mW RMS-Output Magneto-Mechano-Electric Generator by Hybridizing Piezoelectric and Electromagnetic Induction Effects
Advanced Functional Materials
2022,
32 (24).
|
Ferroelectric Polymer Nanofibers Reminiscent of Morphotropic Phase Boundary Behavior for Improved Piezoelectric Energy Harvesting
Small
2022.
|
Vanadium-doped ZnO nanorods: magnetic and enhanced H 2 properties
Applied Physics A: Materials Science and Processin
2022,
128 (12).
|
High-temperature workable flexible piezoelectric energy harvester comprising thermally stable (K,Na)NbO3-based ceramic and polyimide composites
Composites Part B: Engineering
2022,
234,
109671–0.
|
Enhanced poling efficiency via a maximized organic-inorganic interfacial effect for water droplet-driven energy harvesting
Nano Energy
2022,
98.
|
Strain-engineered piezotronic effects in flexible monolayer MoS 2 continuous thin films
Nano Energy
2022,
103.
|
Molten-Salt Processed Potassium Sodium Niobate Single-Crystal Microcuboids with Dislocation-Induced Nanodomain Structures and Relaxor Ferroelectric Behavior
ACS Nano
2022,
16 (9),
15328–15338.
|
Enhanced Piezoelectric Performance of Composite Fibers Based on Lead-Free BCTZ Ceramics and P(VDF-TrFE) Piezopolymer for Self-Powered Wearable Sensors
ACS Sustainable Chemistry and Engineering
2022.
|
Energy harvesting of fully-flexible magnetoelectric composites using a piezoelectric P(VDF-TrFE) and magnetostrictive CoFe 2 O 4 nanofiber
Journal of Materials Chemistry A
2022.
|
Perovskite Piezoelectric-Based Flexible Energy Harvesters for Self-Powered Implantable and Wearable IoT Devices
Sensors (Switzerland)
2022,
22 (23).
|
Characterization of single-crystal macro-fiber composite-based piezoelectric energy harvesters in various temperature and humidity environments
Ceramics International
2022,
48 (8),
10821–10826.
|
Boosting the lifespan of magneto-mechano-electric generator via vertical installation for sustainable powering of Internet of Things sensor
Nano Energy
2022,
101.
|
Design, fabrication, and characterization of piezoelectric single crystal stack actuators based on PMN-PT
Sensors and Actuators, A: Physical
2022,
342.
|