---

Recent papers

Evaluation of the bending strength of preloaded CF/PEKK at high temperature Modern Physics Letters B 2023.

Impact strength and fracture behavior of Halloysite nanotube (HNT)-modified carbon fiber-reinforced polymers (CFRPs) based on the electrophoretic dispersion (EPD) process Modern Physics Letters B 2023.

Study on the physiochemical behavior of PE and epoxy composites immersed in an NaOH solution for a long period Modern Physics Letters B 2023.

Analysis of a New Twin Hybrid Autonomous Underwater Vehicle Applied Sciences (Switzerland) 2023, 13 (3).

Adhesion with Aluminum for Material Surfaces Additively Manufactured by Directed Energy Deposition International Journal of Precision Engineering and 2023.

Deposition characterization of high-manganese (13Mn) steel built via directed energy deposition and its wear behavior Journal of Materials Research and Technology 2023, 22, 2910–2932.

Influence of Heat Treatment on Corrosion Resistance of Sn/Mg Films Formed by PVD Method on Hot-Dip Galvanized Steel Coatings 2023, 13 (1).

Reinforcing effects of gypsum composite with basalt fiber and diatomite for improvement of high-temperature endurance Construction and Building Materials 2022, 325.

Nonlinear modeling on stiffness properties of diatomite-incorporated BFRPs with experimental strength and toughness evaluations Materials Today Communications 2022, 31.

Prediction of permeability of five-harness satin fabric by a modified Kozeny constant determined from experiments Functional Composites and Structures 2022, 4 (1).

Numerical prediction of thermal stress-strain behavior on the wire-directed energy deposition additive manufacturing for automotive component Modern Physics Letters B 2022, 36 (16).

Toughening mechanisms and morphology of composite cylinders interleaved with hybrid nanoparticles Modern Physics Letters B 2022, 36 (17).

Effect of plasma surface modification on mineral fibers/thermoplastic composites Modern Physics Letters B 2022, 36 (17).

Mechanical performance according to fiber lamination pattern for radar mast application Modern Physics Letters B 2022, 36 (17).

Analysis of the voids formation mechanisms in CF/PEKK blank by water absorption behavior Modern Physics Letters B 2022, 36 (17).

High-temperature adhesive properties of CF/PEKK composites applied fusion bonding and adhesive bonding Modern Physics Letters B 2022, 36 (18).

Analysis of process factors for applying pultrusion process of carbon fiber-polyester composites Modern Physics Letters B 2022, 36 (18).

Optimization of HNT nanoparticle distribution based on EPD process in epoxy-CFRP composites Modern Physics Letters B 2022, 36 (18).

Study on Position and Shape Effect of the Wings on Motion of Underwater Gliders Journal of Marine Science and Engineering 2022, 10 (7).

Method of ultrasonic nano-crystal surface modification for improvement of surface characteristics of AISI D2 heat-treated with different tempering conditions International Journal of Advanced Manufacturing Technology 2022, 119 (3-4), 2669–2689.

Microstructure and Mechanical Properties of Fe–4Cr–5Mo–V–6W Powders Hardfaced on AISI D2 Substrate Using Directed Energy Deposition Metals and Materials International 2022, 28 (11), 2621–2636.

Phenomenological Modeling of Distortions and Residual Stresses in Direct Energy Deposition of AISI M4 High Speed Tool Steel on D2 Substrate Metals and Materials International 2022.

Characterization of the deposit-foaming of pure aluminum and Al-Mg-0.7Si alloys using directed energy deposition based on their metallurgical characteristics and compressive behaviors Additive Manufacturing 2022, 59.

Corrosive properties of CuNi2SiCr fabricated through directed energy deposition on a nickel-aluminum bronze substrate Journal of Alloys and Compounds 2022, 918.

Post-building successive treatments using surface laser remelting and ultrasonic nanocrystalline surface modification for rough surface built via directed energy deposition Journal of Manufacturing Processes 2022, 84, 1076–1093.

Defect of functionally graded material of inconel 718 and STS 316L fabricated by directed energy deposition and its effect on mechanical properties Journal of Materials Research and Technology 2022, 17, 478–497.

A study on mechanical properties of CuNi2SiCr layered on nickel-aluminum bronze via directed energy deposition Journal of Materials Research and Technology 2022, 18, 5337–5361.

Mechanical properties and wear resistance of direct energy deposited Fe–12Mn–5Cr–1Ni-0.4C steel deposited on spheroidal graphite cast iron Journal of Materials Research and Technology 2022, 19, 3484–3497.

Study on microstructure and abrasive behaviors of inconel 718-WC composite coating fabricated by laser directed energy deposition Journal of Materials Research and Technology 2022, 21, 2926–2946.

Study on the interfacial characteristics and crack propagation of 630 stainless steel fabricated by hybrid additive manufacturing (additional DED building on L-PBFed substrate) Materials Science and Engineering A 2022, 835.

Effects of Electro-force Control on the Microstructure and Welding Characteristic during Resistance Spot Welding Journal of Korean Institute of Metals and Materials 2022, 60 (5), 350–359.

Different-structured nanoclays incorporated composites: Computational and experimental analysis on mechanical properties Composites Science and Technology 2021, 203.

Enhanced dynamic mechanical properties of different-structured nanoclays incorporated BFRP based on “stick-slip” hypothesis Materials and Design 2021, 207.

Improvement of impregnation quality on out-of-autoclave processed CFRP aircraft wing spar through resin flow simulation Functional Composites and Structures 2021, 3 (2).

Preface International Journal of Modern Physics B 2021, 35 (14-16).

CNT/epoxy interleaves for strengthening performance of filament wound composite structures International Journal of Modern Physics B 2021, 35 (14-16).

Interface-dominated mechanical behavior of CF/PEKK composites according to different heating rate during thermoforming process International Journal of Modern Physics B 2021, 35 (14-16).

Experimental prediction of internal defects according to defect area on NDI via water absorption behavior International Journal of Modern Physics B 2021, 35 (14-16).

Corrosion mechanism and degradation behavior of basalt fiber-reinforced composites in sulfuric acid solution International Journal of Modern Physics B 2021, 35 (14-16).

Electrophoretic deposition of non-conductive halloysite nanotubes onto glass fabrics with improved interlaminar properties of glass/epoxy composites International Journal of Modern Physics B 2021, 35 (14-16).

Study on structural design and analysis of 18 ft CFRP leisure boat International Journal of Modern Physics B 2021, 35 (14-16).

High-temperature Properties of Hot-Work Tool Steel (AISI H13) Deposited via Direct Energy Deposition Minerals, Metals and Materials Series 2021.

Effects of Ultrasonic Nanocrystal Surface Modification on Mechanical Properties of AISI D2 Steel International Journal of Precision Engineering and Manufacturing 2021, 22 (7), 1271–1284.

Control of Local Hardness Gradient of Metal Surface by Inclined Surface Treatment Using Ultrasonic Nanocrystal Surface Modification International Journal of Precision Engineering and 2021, 8 (2), 533–546.

Effect of P21 buffer layer on interfacial bonding characteristics of high‑carbon tool steel hardfaced through directed energy deposition Journal of Manufacturing Processes 2021, 68, 1596–1614.

Effects of process parameters on additive manufacturing of aluminum porous materials and their optimization using response surface method Journal of Materials Research and Technology 2021, 15, 119–134.

Effect of carbon content in steel powder feedstock on impact toughness and microstructure of additively manufactured cast iron by directed energy deposition Journal of Materials Research and Technology 2021, 15, 189–198.

Effect of laser remelting on the surface characteristics of 316L stainless steel fabricated via directed energy deposition Journal of Materials Research and Technology 2021, 15, 5814–5832.

Microstructural evolution and martensitic transformation in FeCrV alloy fabricated via additive manufacturing Materials Science and Engineering A 2021, 809.

Effect of laser power and powder feed rate on interfacial crack and mechanical/microstructural characterizations in repairing of 630 stainless steel using direct energy deposition Materials Science and Engineering A 2021, 828.

Effect of laser rescanning on microstructure and mechanical properties of direct energy deposited AISI 316L stainless steel Surface and Coatings Technology 2021, 405.

Microstructures and mechanical properties of deposited fe‐8cr‐3v‐2mo‐2w on scm420 substrate using directed energy deposition and effect of post‐ heat treatment Materials 2021, 14 (5), 1–25.

Strategy for surface post‐processing of aisi 316l additively manufactured by powder bed fusion using ultrasonic nanocrystal surface modification Metals 2021, 11 (5).

Early hydration and mechanical strength of calcite–ettringite seeds added cement mixture for 3D printing Advances in Applied Ceramics 2021, 120 (5-8), 267–274.

Combined effects of optimized heat treatment and nickel coating for the improvement of interfacial bonding in aluminum-iron alloys hybrid structures Applied Sciences (Switzerland) 2021, 11 (4), 1–15.

Dc 4-point measurement for total electrical conductivity of SOFC cathode material Applied Sciences (Switzerland) 2021, 11 (11).

Evaluation of corrosion behavior on crept alsi10mnmg (Aa365) alloy produced by high‐pressure die‐casting (hpdc) Applied Sciences (Switzerland) 2021, 11 (13).

Effects of heat treatment on the microstructure and hardness of a356 (Alsi 7 mg 0.3 ) manufactured by vertical centrifugal casting Applied Sciences (Switzerland) 2021, 11 (23).

Ultra-high corrosion resistance of Al-Mg-Si film on steel sheet formed by PVD Mg coating and heat treatment Corrosion Science 2021, 192.

더보기