---

Recent papers

Tensile Testing Jig Unit for Foams and Foam-Cored Fiber-Reinforced Plastic Sandwich Composites Fibers and Polymers 2022, 23 (8), 2279–2283.

Study of the optimization of embroidery design parameters for the Technical Embroidery Machine: derivation of the correlation between thread consumption and electrical resistance Textile Research Journal 2022, 92 (9-10), 1550–1564.

A Study on the Radiation Shielding and Absorption Effects of Nonwoven Composites by Monte‐Carlo Simulation Analysis Applied Sciences (Switzerland) 2022, 12 (7).

Facile Glycothermal Synthesis of KxNa(1−x)NbO3 Particles Crystals 2022, 12 (6).

Fabrication of Textile-Based Dry Electrode and Analysis of Its Surface EMG Signal for Applying Smart Wear Polymers 2022, 14 (17).

Development and Characterization of Embroidery-Based Textile Electrodes for Surface EMG Detection Sensors (Switzerland) 2022, 22 (13).

Measurement of Interfacial Bonding Force between Foam and CFRP in Foam-Cored CFRP Sandwich Composites Fibers and Polymers 2021, 22 (7), 1934–1939.

Zinc Hydroxystannate Coated by Aluminum Phosphate for Improving Its Compatibility in Flame-retardant Poly(acrylonitrile-co-vinylidene chloride) Fibers and Polymers 2021, 22 (8), 2156–2162.

Improvement of Interfacial Bonding Force between PMI Foam and CFRP in PMI Foam-Cored CFRP Sandwich Composites Fibers and Polymers 2021, 22 (8), 2281–2284.

Printable wet-resistive textile strain sensors using bead-blended composite ink for robustly integrative wearable electronics Composites Part B: Engineering 2021, 210.

Process optimization for manufacturing pan-based conductive yarn with carbon nanomaterials through wet spinning Polymers 2021, 13 (20).

Implementation of an automated manufacturing process for smart clothing: The case study of a smart sports bra Processes 2021, 9 (2), 1–17.

A basic study on establishing the automatic sewing process according to textile properties Processes 2021, 9 (7).

Analysis of emg electrode locations using 3d body scanning for digital pattern construction of a smart EMG suit Sustainability (Switzerland) 2021, 13 (5), 1–14.

Glycothermally synthesized self-aggregated ZnS spherical particles for methyl orange photodecomposition Journal of Korean Institute of Metals and Materials 2021, 59 (10), 732–740.

Effect of Additive Ammonium Hydroxide on ZnO Particle Properties Synthesized by Facile Glycol Process Korean Journal of Materials Research 2021, 31 (9), 481–487.

Design for Carbon Fiber Lamination of PMI Foam Cored CFRP Sandwich Composite Applied to Automotive Rear Spoiler Fibers and Polymers 2020, 21 (1), 156–161.

Preparation and characterization of zinc hydroxystannate coated by aluminum phosphate and its application in poly(acrylonitrile-co-vinylidene chloride) Polymers 2020, 12 (6).

Flame-retardant mechanism and mechanical properties of wet-spun poly(Acrylonitrile-co-vinylidene chloride) fibers with antimony trioxide and zinc hydroxystannate Polymers 2020, 12 (11), 1–16.

Study on the Flame Retardant and Mechanical Properties of Wet-spun Poly(acrylonitrile-co-vinylchloride) Fibers with Antimony Trioxide and Zinc Hydroxystannate Fibers and Polymers 2019, 20 (4), 779–786.

Properties of modacrylic fibers prepared from poly(Acrylonitrile-co-vinylchloride)—experimental and theoretical studies on coagulation and diffusion during wet spinning AATCC Journal of Research 2019, 6 (Special Issue One), 19–23.

Preparation and properties of carbon fiber/carbon nanotube wet-laid composites Polymers 2019, 11 (10).

Effect of plasma electrolytic oxidation conditions on oxide coatings properties of die-cast AZ91D Mg alloy Korean Journal of Materials Research 2019, 29 (10), 609–616.

Fabrication and characterization of spherical carbon-coated Li 3 V 2 (PO 4 ) 3 cathode material by hydrothermal method with reducing agent Korean Journal of Materials Research 2019, 29 (9), 519–524.

Tensile, Thermal, and Electrical Conductivity Properties of Carbon Fiber Reinforced Composites Using Itaconic Acid Based Dispersants Fibers and Polymers 2018, 19 (2), 416–422.

Fabrication of Cellulose Nanofiber Reinforced Thermoplastic Composites Fibers and Polymers 2018, 19 (8), 1753–1759.

Studies on the improvement of compatibility in reinforced polypropylene composites using polypropylene-g-anhydride itaconate Journal of Thermoplastic Composite Materials 2018, 31 (9), 1281–1292.

Polymerization and wet-spinning of flame retardant poly(acrylonitriie-c0-vinyiidene chloride) copolymers: Effect of vinylidene chloride content Polymer (Korea) 2018, 42 (6), 1077–1084.

Solid electrolyte impedancemetric NOx sensor attached with zeolite receptor Sensors and Actuators, B: Chemical 2018, 264, 177–183.

High-Density Carbon Nanotube Wet-laid Buckypapers with Enhanced Strength and Conductivity Using a High-pressure Homogenization Process Bulletin of the Korean Chemical Society 2017, 38 (4), 438–443.

Low-temperature synthesis of CuS nanopowders using a simple glycolate method Journal of Nanoscience and Nanotechnology 2017, 17 (6), 4352–4355.

Fabrication of ZnS powder by glycothermal method and its photocatalytic properties Korean Journal of Materials Research 2017, 27 (9), 489–494.

Influence of electrolytic KF on the uniform thickness of oxide layers formed on AZ91 Mg alloy by plasma electrolytic oxidation Korean Journal of Materials Research 2017, 27 (9), 495–500.

Effect of water content on the morphology of ZnO powders synthesized in binary solvent mixtures by glycol process Journal of the Korean Ceramic Society 2017, 54 (3), 211–216.

Morphological, thermal, rheological, and mechanical properties of PP/EVOH blends compatibilized with PP-g-IA Polymer Engineering and Science 2016, 56 (11), 1240–1247.

Compatibilizing effects of polypropylene-g-itaconic acid on the polypropylene composites Fibers and Polymers 2016, 17 (5), 671–677.

Facile glycothermal synthesis of ZnO nanopowder at low temperature Ceramics International 2016, 42 (15), 17565–17570.

Fabrication of a stretchable electromagnetic interference shielding silver nanoparticle/elastomeric polymer composite RSC Advances 2016, 6 (57), 52250–52254.

Enhancement of polarization properties of reflective composite sheet Optics Communications 2015, 346, 47–52.

Glycothermal synthesis and photocatalytic properties of highly crystallized anatase TiO 2 nanoparticles Journal of Nanoscience and Nanotechnology 2015, 15 (8), 6193–6200.

Preparation of fiber based binder materials to enhance the gas adsorption efficiency of carbon air filter Journal of Nanoscience and Nanotechnology 2015, 15 (10), 8034–8041.

Organic and organic-inorganic hybrid polymer thin films deposited by PECVD using TEOS and cyclohexene for ULSI interlayer-dielectric application Applied Surface Science 2015, 354, 134–138.

Photoluminescence enhancement of silole-capped silicon quantum dots based on Förster resonance energy transfer Journal of Nanoscience and Nanotechnology 2015, 15 (7), 5057–5061.

Detection of organic vapors based on photoluminescent bragg-reflective porous silicon interferometer Journal of Nanoscience and Nanotechnology 2015, 15 (7), 4999–5003.

Effect of 3-aminopropyltriethoxysilane monolayer self-assembled quartz substrate on the quality of vapor phase-polymerized poly(3,4-ethylenedioxythiophene) nanofilm Journal of Nanoscience and Nanotechnology 2015, 15 (11), 8440–8445.

Synthesis and characterization of microwave-exfoliated graphene oxide-wrapped silicon nanowire via hydrosilylation Journal of Nanoscience and Nanotechnology 2015, 15 (2), 1748–1751.

Detection of human Ig G using photoluminescent porous silicon interferometer Journal of Nanoscience and Nanotechnology 2015, 15 (2), 1083–1087.

Fabrication of stack-structured gas sensor of LaCr x Co 1-x O 3 /Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 and Its NO x sensing properties Korean Journal of Materials Research 2015, 25 (8), 423–428.

더보기