인하대학교 (Inha University)
신소재공학과

Recent papers

Low-temperature laser crystallization of Ge layers grown on MgO substrates
Applied Surface Science 2023, 609.
Improvement in the high temperature mechanical properties of additively manufactured Ti–48Al–2Cr–2Nb alloy using heat treatment
Intermetallics 2023, 153.
Stability and plasma etching behavior of yttrium-based coatings by air plasma spray process
Surface and Coatings Technology 2023, 454.
Microstructural and wear properties of WC-12Co cemented carbide fabricated by direct energy deposition
Wear 2023.
HIGH TEMPERATURE OXIDATION PROPERTY OF Ni BASED SUPERALLOY CM247LC PRODUCED VIA SELECTIVE LASER MELTING PROCESS
Archives of Metallurgy and Materials 2023, 68 (1), 107–112.
EFFECT OF POST-HEAT TREATMENT ON THE IMPACT TOUGHNESS AND CRACK PROPAGATION MECHANISM OF AISI D2 TOOL STEEL MANUFACTURED BY DIRECT ENERGY DEPOSITION
Archives of Metallurgy and Materials 2023, 68 (1), 119–122.
Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy
Nature Communications 2023, 14 (1).
Photo-Carrier Lifetime in Binary and Ternary Heterostructures of Transition Metal Dichalcogenides
Physica Status Solidi (B) Basic Research 2023.
EMI shielding leadless package solution for automotive
Journal of Advanced Joining Processes 2022, 5.
3D Embedded Power Package Module to Integrate Various Power Systems
Proceedings - Electronic Components and Technology Conference 2022.
Modified Unreacted Core Model for Reduction of Manganese Ore by CO Gas
Metals and Materials International 2022, 28 (6), 1517–1524.
Effects of High-Pressure H 2 and D 2 Post-Metallization Annealing on the Electrical Properties of HfO 2 /Si 0.7 Ge 0.3
Physica Status Solidi - Rapid Research Letters 2022.
Significant improvement of conversion efficiency by passivation of low-angle grain boundaries in flexible low-cost single-crystal-like GaAs thin-film solar cells directly deposited on metal tape
Solar Energy Materials and Solar Cells 2022, 243.
Robust low-temperature (350 °C) ferroelectric Hf 0.5 Zr 0.5 O 2 fabricated using anhydrous H 2 O 2 as the ALD oxidant
Applied Physics Letters 2022, 121 (22).
Incremental Drain-Voltage-Ramping Training Method for Ferroelectric Field-Effect Transistor Synaptic Devices
IEEE Electron Device Letters 2022, 43 (1), 17–20.
Effects of RTA Rising Time on Ferroelectric Characteristics of HfZrO 2
IEEE Transactions on Electron Devices 2022, 69 (6), 3499–3502.
High wet-etch resistance SiO 2 films deposited by plasma-enhanced atomic layer deposition with 1,1,1-tris(dimethylamino)disilane
Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films 2022, 40 (2).
Chemical reactions induced by low-energy electron exposure on a novel inorganic-organic hybrid dry EUV photoresist deposited by molecular atomic layer deposition (MALD)
Proceedings of SPIE 2022, 12292.
Impact of Pt grain size on ferroelectric properties of zirconium hafnium oxide by chemical solution deposition
Nano Convergence 2022, 9 (1).
Strain rate effects on microstructure and texture evolution in cold-sheared Al-6 Mg alloys during low-temperature annealing
Journal of Alloys and Compounds 2022, 889.
Effects of complex strain conditions on macroscopic deformation behavior in basal plane of Mg alloy
Materials Science and Engineering A 2022, 833.
Study on the effect of preheating temperature of SLM process on characteristics of CoCrMo alloy
Materials Science and Engineering A 2022, 841.
Effect of Nickel Silicide Content on the Friction Properties of Wet Sintered Friction Material
Journal of Korean Institute of Metals and Materials 2022, 60 (2), 95–101.
Boosting the performance of magneto-mechano-electric energy generator using magnetic lens
Sensors and Actuators, A: Physical 2022, 338.
Energy storage performance and thermal stability of BNT-SBT with artificially modulated nano-grains via aerosol deposition method
Journal of Asian Ceramic Societies 2022, 10 (1), 196–202.
Influence of Post-Heat Treatments on the Microstructure, Mechanical Responses of IN738LC Superalloy Manufactured via Laser Powder Bed Fusion
Advanced Engineering Materials 2022.
Adjusting the Thermomechanical Condition to Change the Microstructure of C–Mn Cold Heading Quality Steel for Rapid Cementite Spheroidization at Subcritical Temperature: Effect of Stored Energy
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2022, 53 (3), 1099–1109.
Effect of Preheating Temperature on Microstructural and Mechanical Properties of Inconel 718 Fabricated by Selective Laser Melting
Metals and Materials International 2022, 28 (11), 2836–2848.
Fundamental Study on the Development of Pure Magnesium Parts by Additive Manufacturing: An Experimental and Computational Analysis
Metals and Materials International 2022.
Analysis of antioxidation behavior of cryo-milled oxide-dispersion-strengthened ferritic steel incorporated with formation of Y–Ti–O(N) nano-precipitates
Acta Materialia 2022, 225.
Effect of repeated laser scanning on the microstructure evolution of carbon-bearing martensitic steel manufactured by laser powder bed fusion: Quenching-partitioning drives carbon-stabilized austenite
Additive Manufacturing 2022, 60.
Analysis of solidification microstructure and cracking mechanism of a matrix high-speed steel deposited using directed-energy deposition
Journal of Alloys and Compounds 2022, 907.
Interstitial carbon content effect on the microstructure and mechanical properties of additively manufactured NiCoCr medium-entropy alloy
Journal of Alloys and Compounds 2022, 918.
Compressive deformation behavior and energy absorption characteristic of additively manufactured sheet CoCrMo triply periodic minimal surface lattices
Journal of Materials Research and Technology 2022, 18, 171–184.
1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion
Journal of Materials Science and Technology 2022, 97, 10–19.
Effect of carrier gas species on the microstructure and compressive deformation behaviors of ultra-strong pure copper manufactured by cold spray additive manufacturing
Journal of Materials Science and Technology 2022, 97, 264–271.
Stabilized sub–grain and nano carbides–driven 1.2GPa grade ultra–strong CrMnFeCoNi high–entropy alloy additively manufactured by laser powder bed fusion
Journal of Materials Science and Technology 2022, 117, 8–22.
Microstructure and tensile properties of bulk AISI D2 tool steel fabricated by direct energy deposition
Materials Characterization 2022, 194.
Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting
Materials Science and Engineering A 2022, 841.
The creep and fracture behavior of additively manufactured Inconel 625 and 718
Materials at High Temperatures 2022.
EFFECT OF Nb AND Mo ADDITION ON THE MICROSTRUCTURE AND WEAR BEHAVIOR OF Fe-Cr-B BASED METAMORPHIC ALLOY COATING LAYER MANUFACTURED BY PLASMA SPRAY PROCESS
Archives of Metallurgy and Materials 2022, 67 (4), 1521–1524.
EFFECT OF MICROSTRUCTURE AND UNIT CELL’S GEOMETRY ON THE COMPRESSIVE MECHANICAL RESPONSE OF ADDITIVELY MANUFACTURED Co-Cr-Mo SHEET I-WP LATTICE
Archives of Metallurgy and Materials 2022, 67 (4), 1525–1529.
Manufacture of MoO 3 Coating Layer Using Thermal Spray Process and Analysis of Microstructure and Properties
Archives of Metallurgy and Materials 2022, 67 (4), 1535–1538.
Effect of EMS Process on the Primary Si Refinement, Tensile and Fatigue Properties of Hyper-eutectic Al-15wt.%Si Alloy
Journal of Korean Institute of Metals and Materials 2022, 60 (5), 360–369.
Origin of the different degradation mechanisms of LNCM and LNCA cathodes in Li-ion batteries
Physical Chemistry Chemical Physics 2022, 24 (5), 3429–3439.
Investigation of the effect of point defects on the Li-ion conductivity of Li 3 InCl 6
Dalton Transactions 2022, 51 (47), 18159–18168.
Computational Investigation of Hydriding and Strain Effects on the Binding Energies of Electrochemical CO2RR and HER Intermediates
Journal of Physical Chemistry C 2022, 126 (12), 5513–5520.
Ultrasensitive N-Channel Graphene Gas Sensors by Nondestructive Molecular Doping
ACS Nano 2022, 16 (2), 2176–2187.
Effective (Pd,Ni)Sn 4 diffusion barrier to suppress brittle fracture at Sn-58Bi-xAg solder joint with Ni(P)/Pd(P)/Au metallization pad
Microelectronics Reliability 2022, 129.
Microstructure analysis of 8 μm electrolytic Cu foil in plane view using EBSD and TEM
Applied Microscopy 2022, 52 (1).
Effect of laser surface cleaning of corroded 304L stainless steel on microstructure and mechanical properties
Journal of Materials Research and Technology 2022, 16, 373–385.
Growth behaviors of aluminum nitride in steel during laser nitriding: Insights into interfacial energy and segregation throughout its growth habit
Materials Characterization 2022, 183.
Facile strategy for advanced selectivity and sensitivity of SnO 2 nanowire-based gas sensor using chemical affinity and femtosecond laser irradiation
Sensors and Actuators, B: Chemical 2022, 372.
Effect of Sn addition on the Microstructure and Friction-wear Properties of a Nodular Graphite Cast Iron
Journal of Korean Institute of Metals and Materials 2022, 60 (6), 471–477.
Robust, Ultrasmooth Fluorinated Lithium Metal Interphase Feasible via Lithiophilic Graphene Quantum Dots for Dendrite-Less Batteries
Small 2022, 18 (19).
Gate-controlled gas sensor utilizing 1D–2D hybrid nanowires network
iScience 2022, 25 (1).
Visualizing Line Defects in non-van der Waals Bi 2 O 2 Se Using Raman Spectroscopy
ACS Nano 2022, 16 (3), 3637–3646.
Catalyst-free synthesis of sub-5 nm silicon nanowire arrays with massive lattice contraction and wide bandgap
Nature Communications 2022, 13 (1).
Raman tensor studies on defective non-van der Waals Bi 2 O 2 Se
AIP Advances 2022, 12 (10).
Highly Stable Fe 2+ /Ti 3+ -Based Fluoride Cathode Enabling Low-Cost and High-Performance Na-Ion Batteries
Advanced Functional Materials 2022.
Li-Rich Mn–Mg Layered Oxide as a Novel Ni-/Co-Free Cathode
Advanced Functional Materials 2022.
Effect of Cooling Rate on Phase Transformation Behavior during Isothermal Annealing of SCr420 Steel
Steel Research International 2022, 93 (5).
Effects of Mn Segregations on Intergranular Fracture in a Medium-Mn Low-Density Steel
Steel Research International 2022.
Atomistic simulations of the deformation behavior of an Nb nanowire embedded in a NiTi shape memory alloy
Acta Materialia 2022, 228.
Diffusion in A15 Nb 3 Sn: An atomistic study
Acta Materialia 2022, 234.
Experimental investigation and thermodynamic description of Mg–Sc–Zn ternary system
Calphad: Computer Coupling of Phase Diagrams and Thermochemistry 2022, 77.
An integrated computational and experimental method for predicting hydrogen plateau pressures of TiFe 1-x M x -based room temperature hydrides
International Journal of Hydrogen Energy 2022, 47 (40), 17673–17682.
Atomistic simulations of AuTi high-temperature shape memory alloys
International Journal of Mechanical Sciences 2022, 227.
Small-scale analysis of brittle-to-ductile transition behavior in pure tungsten
Journal of Materials Science and Technology 2022, 105, 242–258.
Joining dissimilar metal of Ti and CoCrMo using directed energy deposition
Journal of Materials Science and Technology 2022, 111, 99–110.
Mechanically derived short-range order and its impact on the multi-principal-element alloys
Nature Communications 2022, 13 (1).
A high-energy conversion-type cathode activated by amorpholization for Li rechargeable batteries
Journal of Materials Chemistry A 2022, 10 (37), 20080–20089.
Entropy-stabilized silicides: Expanding the B20 single-phase region from mono-silicide to high-entropy silicide
APL Materials 2022, 10 (12).
Atomistic simulations of Ag–Cu–Sn alloys based on a new modified embedded-atom method interatomic potential
Journal of Materials Research 2022, 37 (1), 145–161.
Molecular Dynamics Simulations of PtTi High-Temperature Shape Memory Alloys Based on a Modified Embedded-Atom Method Interatomic Potential
Materials 2022, 15 (15).
Dense Local Triplet States and Steric Shielding of a Multi-Resonance TADF Emitter Enable High-Performance Deep-Blue OLEDs
Advanced Materials 2022.
Boron-Based Multi-Resonance TADF Emitter with Suppressed Intermolecular Interaction and Isomer Formation for Efficient Pure Blue OLEDs
Small 2022, 18 (19).
Highly Efficient Deep-Blue Phosphorescent OLEDs Based on a Trimethylsilyl-Substituted Tetradentate Pt(II) Complex
ACS Applied Materials and Interfaces 2022, 14 (30), 34901–34908.
Bicarbazole-triazine hybrid type mixed host materials for blue phosphorescent OLEDs with enhanced efficiency and lifetime
Journal of Materials Chemistry C 2022, 10 (22), 8602–8608.
High removal efficiency of industrial toxic compounds through stable catalytic reactivity in water treatment system
Chemosphere 2022, 287.

더보기